Specifications

Light source

660 nm visible red LED

Optical system

2048 pixel CCD (charge-coupled device)

Depth of scan field

0-250 mm

Scanning width

120 mm

Scan speed

200 scans/sec

Current - sleep mode

25 mA @ 5VDC

Resolution

0.1mm (4mils) - Code 39,PCS=90 %, on contact

Print contrast

30% or more

EMC

FCC Class A

Scanning angle

Front: 60° Rear: 60° Yaw: 75°

Decode capability

Autodiscriminates all standard one-dimension barcodes; other symbologies can be ordered optionally

Cable - universal type

Straight 2.3 m

Beeper operation

7 tones or no beep

Indicator

Green LED

Length

182 mm

Cushion material

Rubber

Width-handle

26 mm

Width-head

74 mm

Depth-handle

51 mm

Depth-head

35 mm

Weight

160 g (cable not included)

Cable - K/B wedge

Straight 2.0 m

Connector type

RJ-45 phone jack connector

Case material

ABS plastic + PC

Input voltage

5 VDC ± 0.25V

Shock resistance

0℃ to 45℃ (32℉ to 113℉)

Power - operating

1275 mW

Power - standby

600 mW

Current - operating

255 mA @ 5 VDC

Current - standby

120 mA @ 5 VDC

DC transformers

Class 2; 5VDC @ 450 mA

Storage

-40℃ to 60℃ (-40℉ to 140℉)

Humidity

5% to 90% relative humidity, non-condensing

Light level

Up to 60000 Lux

Shock

1.5m drop onto concrete

Programming method

Manual (reading special barcode) DOS command through RS-232, Windows configuration program

Contaminants

Sealed to resist airborne particulate contaminants

Program upgrade

Enabled by build-in flash memory

Programmable characteristics

Code type selection, check digit selection Decoding option Transmitted character delay, Header selection, trailer selection, message suffix, good read beep tone and volume, scanner trigger selection Keyboard emulation type (intermessage delay, keyboard type and keyboard language).Serial interface type (ACK/NAK, Xon/Xoff, RTS/CTS, good read LED control, start/stop bits)