Specifications

Light source

630nm Visible Red LED

Optical system

2048 pixel CCD (Charge-coupled device)

Depth of scan field

0-600 mm (Code39, PCS=90%, 20mil)

Scanning width

160mm

Scan speed

450 scan/sec

Resolution

0.1mm (4mil) Code39, PCS=90%, on contact

Print contrast

30% or more

Scanning angle

Front: 60° Rear: 60° Yaw: 75°

Decode capability

Autodiscriminates all standard barcodes; Other symbologies can be ordered optionally

Beeper operation

7 tones or no beep

Indicator

Green & Red Led (2 more LED for 8510 cradle)

Length

164 mm

Width-handle

30 mm

Width-head

78 mm

Depth-handle

56 mm

Depth-head

35 mm

Weight

250g (battery included)

Connector type

RJ-45 phone jack connector

Case material

ABS plastic (over molded at contact pointed)

Input voltage

5 VDC ± 0.25V

Power - operating

900 mW

Power - standby

150 mW

Current - operating

225 mA @ 4.2 VDC

Current - standby

32 mA @ 4.2 VDC

Agency Listing

UL, FCC Class B, CE, BSMI

Operating Temperature

0? to 50? (32? to 122?)

Storage

-20? to 70? (-4? to 158?)
(battery not included for 8510)

Humidity

10% to 90% relative humidity, non-condensing

Light level

Up to 70000 lux

Shock

1.5m drop onto concrete (90cm for 8510 cradle)

Contaminants

Seals to resist airborne particulate contaminants ( IP 42 )

Programming method

Manual (Reading special barcodes) DOS command through RS232, Windows configuration program

Program upgrade

Enabled by built-in flash memory

Programmable characteristics

Code type selection, check digit selection, Decoding option, Transmitted character delay, header selection, trailer selection, message suffix, good read beep tone and volume, scanner trigger selection
Keyboard emulation type (intermessage delay, keyboard type and keyboard language)
Serial interface type (ACK/NAK, Xon/Xoff, RTS/CTS, good read LED control, start/stop bits)
Cordless type (special cordless transmission character settings for 8510)